Such pumps can be used in following field:
Households, Commercial Complexes, Gardens, Agriculture, Horticulture, Small Industries, Car-Washing, Cooling Systems, Drawing Water Out a Well,
Pressure Boosting in Buildings and Industry, Pressurisation Systems, Drinking Water
The booster set cuts in and out by means of the pressure switch. When water is tapped from the system, it will at first be tapped from the pressure tank,
see below fig. Then the pressure falls to the preset cut-in pressure and the pump will cut in. When the water consumption drops,
the discharge pressure increases and the pump cuts out when the pressure reaches the preset cut-out pressure of the pressure switch.
Automatic working pressure systems build-up with centrifugal or self-priming electropumps + VSD EPIC. Each set, ready for the installation,
is made by an electropump, a pre-rated and adjustable pressure switch, pressure gauge, connector (and eventually a flexible hose with s.s. sheath),
membrane tank and cable with plug. The set specification and performances are related to the adapted electro pump, tank capacity and pressure switch rating.
APPLICATIONS
- Water pressure boosting
- Water transferring
- Water circulating
- Pressure boosting in water systems for domestic use, lawn
- sprinkling and washing
- Pumping of non-aggressive liquids in industrial plants
FEATURES
- Pump Body : Cast Iron, SS304, SS316
- Casing : SS304, SS316
- Impeller : SS304, SS316
- The temperature of the Liquid : (-)15 – 110 ℃
MOTOR:
- Type: 3~230/40050Hz;1~230V-50Hz 3~220/380V-60Hz;1~230V-60Hz With Thermal Protection
- Insulation Class: F
- Degree of Protection: IP44